Harmonic Balancer - Crankshaft Pulley: Service and Repair

REMOVAL
1. Remove accessory drive belts.
2. Remove crankshaft damper bolt.

Fig.75:

3. Remove damper using Special Tool 3-Jaw Puller 1026 and Insert 6827-A (Fig. 75).

INSTALLATION

Fig.76:

1. Install crankshaft vibration damper using M12 1.75 x 150 mm bolt, washer, thrust bearing and nut from Special Tool 6792 (Fig. 76).
2. Install crankshaft vibration damper bolt and tighten to 142 Nm (105 ft. lbs.).
3. Install accessory drive belts.