B2331

B222D - ECU UNABLE TO CONFIGURE/CONFIGURATION NOT LEARNED

WHEN MONITORED
With the ignition on.

SET MONITORED
TBD

Diagnostic Test

1. PERFORM THE VEHICLE DEMAGNETIZING PROCEDURE

NOTE:
- A blank compass display indicates that vehicle degaussing is required.
- After demagnetizing, the vehicle will enter Auto Fast-Cal when the ignition is turned on.
- Ensure that the correct compass variance is stored in the compass memory. See "Setting Compass Variance in the Service Information."

Refer to the Service Information for the Compass Demagnetizing Standard Procedure.
View repair.

Repair
When the Demagnetizing Procedure is complete, perform the Verification Test. Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test