Front Bumper Reinforcement: Service and Repair

SUPPORT-FRONT FASCIA

REMOVAL




1. Remove the front fascia. Refer to Front Bumper.
2. Remove the front bolts next to the fog lights.




3. Disconnect the fog lamp electrical connectors, if equipped.




4. Release the tabs and remove the bumper.
5. Remove the fog lamps from the bumper as necessary.

INSTALLATION




1. Install the fog lamps into the bumper, if necessary.
2. Position the bumper onto the bumper support and seat the tabs fully.




3. Connect the fog lamp electrical connectors, if equipped.




4. Install the front bolts next to the fog lamps.
5. Install the fascia.