Carpet: Service and Repair
CARPETREMOVAL
1. Remove the front seats.
2. Remove the floor console.
3. Using a trim stick C-4755 or equivalent, remove the door sill scuff plates.
4. Remove the cowl trim panels.
5. Fold the second row seats forward and remove the right and left side bolts (1 & 2).
6. Remove the second row seat assembly.
7. Remove the third row seat assembly, if equipped.
8. Remove the bolts (1 & 2) and remove storage bin, if equipped.
9. Remove the carpet from under the side trim panels.
10. Remove the carpet.
INSTALLATION
1. Position the carpet in vehicle and tuck up under the side trim panels.
2. Install the third row seat assembly, if equipped.
3. Install the storage bin, if equipped, and screws and tighten the rear screws to 7 N.m (60 in.lbs.).
4. Install the second row seat assembly and install the bolts (1 & 2).
5. Tighten the front bolts (2) to 27 N.m (20 ft.lbs.).
6. Tighten the rear bolts (1) to 47 N.m (35 ft.lbs.).
7. Install the cowl trim panels.
8. Position the door sill scuff plates and seat the clips fully.
9. Install the floor console.
10. Install the front seats.