Front Tilt Motor

REMOVAL




1. Disconnect and isolate the battery negative cable.
2. Remove the affected seat with the inoperative motor (1) .
3. Remove the seat cushion and pan .




4. Disconnect the motor electrical connector.




5. Remove the fasteners holding the motor to the seat adjuster (1).
6. Remove motor from seat adjuster (2).

INSTALLATION




1. Position motor (1) on seat adjuster (2).




2. Install the fasteners (1) holding the motor to the seat adjuster (2).




3. Connect the motor electrical connector.
4. Install the seat cushion .
5. Clip the wire harness to cushion pan.
6. Install the seat assembly .
7. Connect the battery negative cable.
8. Verify system and vehicle operation.