Bearing - Axle

BEARING-AXLE

REMOVAL





1. Remove axle shaft.
2. Remove axle seal with pry bar.
3. Position bearing Receiver 9338 (1) on axle tube.





4. Insert bearing Remover 6310 (4) with Foot 6310-9 (3) through receiver (2) and bearing (1).





5. Tighten Remove 6310 nut (1) to pull bearing into the receiver (3).

INSTALLATION





1. Remove any old sealer/burrs from axle tube.
2. Install axle shaft bearing with Installer 9337 (1) and Handle C-4171 (2). Drive bearing in until tool contacts the axle tube.

Note: Bearing is installed with the bearing part number against the installer.

3. Coat new axle seal lip with axle lubricant and install with Installer 9337 and Handle C-4171.
4. Install axle shaft.