Integrated Power Module (IPM)

REMOVAL




1 Disconnect the negative and positive battery cables.
2 Unsnap cover and remove the B+ terminal nut from the integrated power module (IPM). Remove the B+ cable.
3 Remove the IPM from the retaining bracket (1).
4 Disconnect the connectors from the (IPM).
5 Remove the Front Control Module (FCM) (2) retaining screws.
6 Disconnect the front control module by pulling it straight off the integrated power module.

INSTALLATION




1 Install the Front Control Module (FCM) (2) to the Integrated Power Module (IPM).
2 Connect the electrical connectors to the IPM (1).
3 Install the IPM to the retaining bracket.
4 Install the B+ cable and nut on the IPM B+ terminal. Snap the cover in place.
5 Connect the negative and positive battery cables.