Hose - Return

RETURN HOSE

REMOVAL





1. Siphon the power steering system.
2. Raise and support the vehicle.
3. Disconnect the return hose (4) at the gear (2).
4. Disconnect the return hose (4) at the cooler (5).
5. Disconnect the return hose from the crossmember.
6. Remove the return hose from the vehicle.

INSTALLATION





1. Install the return hose to the vehicle.
2. Reconnect the return hose (4) at the cooler (5).
3. Reconnect the return hose (4) at the gear (2).
Tighten the hose to 38 Nm (28 ft. lbs.).
4. Route the return hose to the crossmember and secure.
5. Remove the support and lower the vehicle.
6. Refill the power steering system.