Bearing/Bushing-Axle

BEARING/BUSHING-AXLE

REMOVAL
1. Remove half shaft, axle shaft and seal.





2. Install axle shaft bearing Remover C-4660-A (3) in the bearing (1). Then tighten the nut (2) to spread the remover in the bearing.





3. Install bearing remove cup (1) bearing (2) and nut (3). Tighten nut (3) to draw bearing out.
4. Inspect axle shaft tube bore for roughness and burrs.

INSTALLATION
1. Wipe the axle shaft tube bore clean.





2. Install axle shaft bearing with Installer 5063 (1) and Handle C-4171 (2).





3. Install new axle shaft seal with Installer 8402 (1) and Handle C-4171 (2).
4. Install axle shaft and half shaft.