Dodge

REMOVAL

NOTE: Only the outboard passenger side instrument panel air outlet can be serviced separately.




1. Rotate the top of the outboard passenger side air outlet barrel (1) downwards.




2. Gently pull out on the bottom edge of the air outlet (1) to release the snap clip retainers that secure the outlet to the instrument panel (2).
3. Remove the air outlet from the instrument panel.

INSTALLATION




1. Position the air outlet (1) into it's location on the outboard passenger side of the instrument panel (2).

NOTE: Make sure that the air outlet is properly aligned to the duct within the instrument panel opening and that the foam seal on the outlet is properly installed.

2. Align the air outlet foam seal (3) with the duct in the instrument panel (4) and gently push on the air outlet until the snap clip retainers on the outlet are fully engaged to the instrument panel.