B1A26
B1A26-MAXIMUM NUMBER OF KEYS PROGRAMMEDWHEN MONITORED
With the ignition switch on.
SET CONDITION
When the maximum number of key (8) have been programmed into the SKREEM
POSSIBLE CAUSES
- Maximum amount of key programmed into SKREEM
- SKREEM
DIAGNOSTIC TEST
1. MAXIMUM AMOUNT OF KEYS PROGRAMMED INTO SKREEM
NOTE: The below procedure has you clearing all the key information within the SKREEM. It is important to obtain all the customer's ignition key(s) so they may be reprogrammed into the module.
Turn the ignition on.
Using a scan tool, clear all the key information in the SKREEM.
Program the all the customer key(s) into the SKREEM (up to eight only)
Q: Was the "Maximum Number of Keys Programmed" display again?
YES: Replace and program the SKREEM. Perform SKREEM VERIFICATION TEST. Vehicle Theft Security Verification Tests
NO: Programming of the key(s) were successful. Test complete. Perform SKREEM VERIFICATION TEST. Vehicle Theft Security Verification Tests