U1414

U1414-IMPLAUSIBLE/MISSING ECU CONFIGURATION DATA

WHEN MONITORED
With the ignition on. The ORC on board diagnostics continuously monitors the CAN Bus message from the FCM containing the ORC Configuration Data.

SET CONDITION
This DTC will set if the appropriate CAN Bus message is not received by the ORC.

POSSIBLE CAUSES
- Front control module

DIAGNOSTIC TEST

1. FRONT CONTROL MODULE FAILURE
Turn the ignition on.
With the scan tool, read FCM DTCs.

Q: Does the scan tool display any Front Control Module DTCs?

YES: Select appropriate symptom. Repair all FCM active DTCs and before diagnosing the ORC DTCs.
NO: Replace the Front Control Module. Perform the ORC VERIFICATION TEST-VER. 1. Occupant Restraint Controller (ORC) Verification Test