Front Door Window Glass: Service and Repair

GLASS

REMOVAL




1. Remove the trim panel from the inside of the front door.
2. Remove the speaker from the inside of the front door.
3. Remove the inner belt weatherstrip from the front door.
4. Remove the watershield from the inside of the front door. Refer to Front Door Panel.
5. Using the regulator, adjust the front door glass (1) position up or down as required for access to the two window regulator glass clamps (3).
6. Loosen the screw (2) in each of the glass clamps far enough to release the glass.




7. From the outside of the front door, lift the glass (1) upward far enough to disengage it from the two glass clamps (2).
8. Lift the rear side of the glass upward and out from the top of the door shell first to unload the glass from the door.

INSTALLATION




1. From the outside of the front door, insert the front side of the glass (1) into the top of the door shell first to load the glass into the door.
2. Engage the glass into the two window regulator glass clamps (2).




3. Using the regulator, lower the window as required for access to the two window regulator glass clamp screws (2).
4. Tighten the screw in each of the glass clamps. Tighten the screws to 10 N.m (90 in.lbs.).
5. Reinstall the watershield onto the inside of the front door.
6. Reinstall the inner belt weatherstrip onto the front door.
7. Reinstall the speaker onto the inside of the front door.
8. Reinstall the trim panel onto the inside of the front door.