Radiator Cooling Fan: Service and Repair

RADIATOR FAN

REMOVAL
1. Disconnect negative battery cable.
2. Partially drain cooling system.





3. Remove upper radiator hose (3).
4. Disconnect cooling fan electrical connector (2).
5. Remove cooling fan mounting bolts.
6. Remove radiator cooling fan assembly (1) from vehicle.

INSTALLATION





1. Position radiator cooling fan assembly (1) in vehicle.
2. Install cooling fan mounting bolts. Tighten to 6 Nm (50 inch lbs.).
3. Connect cooling fan electrical connector (2).
4. Install upper radiator hose (3).
5. Fill cooling system.
6. Operate engine until it reaches normal operating temperature. Check cooling system and automatic transmission for correct fluid levels.