Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Hood Sensor/Switch (For Alarm): Service and Repair
REMOVAL1. Open hood.
Battery Negative Cable - Remove/Install:
2. Disconnect and isolate the battery negative cable.
3. Disconnect wire harness connector from hood ajar switch.
Hood Ajar Switch Location:
4. Firmly press tangs on the bottom side of the switch together and push up through bracket .
5. Remove switch from vehicle.
INSTALLATION
1. Firmly press hood ajar switch through bracket .
2. Connect wire harness connector to hood ajar switch.
3. Connect the battery negative cable .
4. Close hood.
5. Verify vehicle and system operation.