P0607

P0607-ECM INTERNAL FAILURE


WHEN MONITORED
With the key on or engine running.

SET CONDITION
ECM had detected internal failures.

POSSIBLE CAUSES
- ECM

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding.

Diagnostic Test

1. ECM
Turn the ignition on.

NOTE: This DTC is caused by an internal Engine Control Module failure. Repairs are not possible to the ECM.

Q: Is the DTC P0606 set?

YES: Replace and program the ECM in accordance with the Service Information. Perform the POWERTRAIN VERIFICATION TEST VER - 1 (DIESEL). Powertrain Verification Test - Ver 1
NO: Test Complete.