63 - Rear Reset Switch Closed
REAR RESET SWITCH CLOSED-63When Monitored
Ignition on.
Set Condition
When not in Antilock control mode and the reset switch voltage is low.
Possible Causes
- HYDRAULIC CONTROL UNIT
Diagnostic Test
1. VERIFYING DTC
Turn the ignition on.
With the DRBIII clear DTCs.
Turn the ignition off.
Turn the ignition on.
With the DRBIII read DTCs.
Does the DTC reset?
Yes >> Replace the Hydraulic Control Unit in accordance with the Service Information.
Perform ABS VERIFICATION TEST - VER 1. ABS Verification Test
No >> Test Complete.