Incorrect Odometer Value Found

INCORRECT ODOMETER VALUE FOUND

WHEN MONITORED
During power up.

SET CONDITION
If the Instrument Cluster detects the odometer value memory is corrupted, this code will set. When this code is set the VF Odometer displays [ - - ].

POSSIBLE CAUSES
- Instrument cluster

DIAGNOSTIC TEST

1. INSTRUMENT CLUSTER

CAUTION: Do not attempt to exchange or "swap" an Instrument Cluster from one vehicle to another. Module memory/configuration damage may occur.

NOTE:
- When this code is set the VF Odometer will display dashes (- -).
- If the PCM has been replaced, program the new module with the correct VIN.

Ensure that the Instrument Cluster has not been damaged or previously installed in a different vehicle.
With the DRBIII(R), erase DTCs.
Cycle the ignition.
With the DRBIII(R), read DTCs.

Q: Did this DTC reset?

YES: Replace and configure the Instrument Cluster. Perform BODY VERIFICATION TEST - VER 1. Body Verification Test
NO: Test Complete.