CMTC Internal Failure

CMTC INTERNAL FAILURE

POSSIBLE CAUSES
- Electronic overhead module

Diagnostic Test

1. ELECTRONIC OVERHEAD MODULE
Perform the EOM Self Test. Self-Diagnostic Test
Turn the ignition off.
Press and hold the C/T button and the RESET button.
Turn the ignition on.

NOTE: The EOM Self Test can also be performed using the DRBIII(R).

Turn the ignition on.
With the DRBIII(R), select body, EOM, System Test, then Self Test.
Observe the DRBIII(R) or the EOM display following the Self Test.

When the trouble code EOM INTERNAL FAILURE is displayed, View repair.

Repair
Replace and program the Electronic Overhead Module. Perform BODY VERIFICATION TEST - VER 1. Body Verification Test