Front Door Latch: Service and Repair
LATCHREMOVAL
1. Raise the window to the full up position and remove the door trim panel.
2. Position the waterdam out of the way and disconnect the actuator rod (3) from the door latch (2) and the interior door handle actuator (5) and remove the rod.
3. Disconnect the door wire harness connector (2) from the door latch (3).
4. Remove the three bolts (4) that secure the door latch to the door (1) and remove the latch.
INSTALLATION
1. Position the door latch (3) into the door (1).
2. Install the three bolts (4) that secure the door latch to the door. Tighten the bolts to 10 N.m (89 in.lbs.).
3. Connect the door wire harness connector (2) to the door latch.
4. Connect the actuator rod (3) to the door latch (2) and the interior door handle actuator (5).
5. Reposition the waterdam to the door (1) and install the door trim panel.
6. If necessary, adjust the latch.