Idle Speed/Throttle Actuator - Electronic: Service and Repair

REMOVAL
The IAC motor is inserted into a housing at the front of the intake manifold. The IAC motor and housing are serviced together.

1. Remove housing to manifold screws. Remove IAC motor and housing.
2. Disconnect the electrical connector from IAC motor.

INSTALLATION
The IAC motor is inserted into a housing at the front of the intake manifold. The IAC motor and housing are serviced together.

1. Attach electrical connector to IAC motor.
2. Install IAC motor into and housing on manifold. Tighten mounting screws to 4 Nm (35 in. lbs.) torque.