Throttle Body: Service and Repair

REMOVAL




1. Remove the throttle cable.




2. Remove the battery cover and disconnect the negative battery cable.
3. Remove the air cleaner assembly, refer to the Engine/Air Intake System/Air Cleaner Housing for more information.
4. Disconnect the TPS electrical connector.




5. Remove the throttle body bolts.




6. Remove the throttle body wiring clips.
7. Remove the throttle body.

INSTALLATION
1. Mount throttle body and wiring clips , tighten bolts to 12 Nm (105 in. lbs.).
2. Connect electrical connector to throttle position sensor.
3. Install the throttle cable.
4. Install the air cleaner housing, refer to Engine/Air Intake System/Air Cleaner Housing.
5. Connect the negative battery cable and install the battery cover.