Left Mount

LEFT MOUNT

REMOVAL
1. Remove air cleaner assembly.
2. Disconnect negative cable from battery.
3. Remove bolts attaching the Power Distribution Center (PDC) bracket to left mount and battery tray.
4. Support transaxle with a suitable jack.





5. Remove mount to transaxle bolts (Fig. 90).
6. Remove left mount bracket to body frame rail fasteners (Fig. 90).
7. Remove mount.

INSTALLATION
1. Install engine mount bracket to body frame rail and tighten fasteners to 28 Nm (250 inch lbs.) (Fig. 90).
2. Position engine/transaxle for installation of mount to transaxle bolts. Install and tighten bolts to 68 Nm (50 ft. lbs.) (Fig. 90).
3. Remove jack from under transaxle.
4. Install the Power Distribution Center (PDC).
5. Connect negative cable to battery.
6. Install air cleaner assembly.