Shift Cable: Service and Repair

GEAR SHIFT CABLE

REMOVAL
1) Disconnect battery cables.
2) Remove battery shield.
3) Remove battery.
4) Remove speed control servo and position out of way.

Fig. 206 Gearshift Cable at Transaxle - Typical:

5) Disconnect gear shift cable at manual valve lever (Fig. 206).
6) Disconnect gear shift cable from upper mount bracket (Fig. 206).

Fig. 207 Instrument Panel Lower Silencer:

7) Remove instrument panel lower silencer (Fig. 207).

Fig. 208 Knee Bolster:

8) Remove knee bolster (Fig. 208).

Fig. 209 Gearshift Cable at Column:

9) Disconnect gear shift cable from gear shift lever (Fig. 209).
10) Remove gear shift cable from column bracket (Fig. 209).

Fig. 210 Gearshift Cable/Grommet at Dash Panel:

11) Disengage grommet from dash panel (Fig. 210) and remove gear shift cable from inside vehicle.

INSTALLATION

Fig. 211 Gearshift Cable/Grommet at Dash Panel:

1) Fish gear shift cable dash panel opening into engine compartment and secure grommet (Fig. 211).

Fig. 212 Gearshift Cable at Column:

2) Install gear shift cable through column bracket (Fig. 212) until audible "click" is heard.
3) Connect gear shift cable to gear shift lever (Fig. 212).

Fig. 213 Knee Bolster:

4) Install knee bolster (Fig. 213).

Fig. 214 Instrument Panel Lower Silence:

5) Install instrument panel lower silencer (Fig. 214).

Fig. 215 Gearshift Cable at Transaxle:

6) Install gear shift cable to transaxle upper mount bracket (Fig. 215). An audible "click" should be heard.
7) Connect gear shift cable end to transaxle manual valve lever (Fig. 215).
8) Adjust gearshift cable.
9) Install speed control servo into position.
10) Install battery.
11) Install battery shield.
12) Connect battery cables.