Seat Back - Second Row
CUSHION/COVER-SEAT BACK - SECOND ROWREMOVAL
1. Remove the seat cushion.
2. Remove the nut and disconnect the seat belt anchor.
60/40 Seat Back - Wagon
40% SEAT BACK SIDE
1. Fold the 40% section of the seat (2) down.
2. Remove the nuts (5).
3. Pivot the seat back off the pivot pin (3) located on the 60% seat back.
4. Remove the seat back from vehicle.
60% SEAT BACK SIDE
1. With the 40% seat back removed.
2. Fold the 60% section of the seat down.
3. Remove the four nuts attaching seat back (5).
4. Remove the seat back for vehicle.
60/40 Seat Back - Domestic Sedan
40% SEAT BACK SIDE
1. Fold the 40% section of the seat (3) down.
2. Remove the two nuts (4) attaching seat back.
3. Pivot the seat back off the pivot pin (1) located on the 60% seat back (2).
4. Remove the seat back from vehicle.
60% SEAT BACK SIDE
1. With the 40% seat back removed.
2. Fold the 60% section of the seat down.
3. Remove the four nuts attaching seat back (5).
4. Remove the seat back for vehicle.
60/40 Seat Back - Export Sedan
40% SEAT BACK SIDE
1. Fold the 40% section of the seat (3) down.
2. Remove the three nuts (4) attaching seat back.
3. Remove the seat back from vehicle.
60% SEAT BACK SIDE
1. With the 40% seat back removed.
2. Remove the four nuts (1) and (3) attaching seat back.
3. Remove the seat back from vehicle.
INSTALLATION
REMOVAL
1. Place seat belt into position and install the seat belt anchor nut. Tighten nut to 32 N.m (24 ft.lbs.).
2. Place the seat cushion into position and push downward on the forward edge of the seat cushion to lock into position.
60/40 Seat Back - Wagon
60% SEAT BACK SIDE
1. With the 40% seat back removed.
2. Place 60% seat back (5) into position on the studs.
3. Fold the 60% section of the seat down.
4. Install the four nuts (6) attaching seat back (5). Tighten nuts to 57 N.m (42 ft.lbs.).
40% SEAT BACK SIDE
1. Place the 40% section (2) into position.
2. Slide 40% seat back onto the pivot pin (3) located on the 60% seat back.
3. Install the two nuts (5) attaching seat back. Tighten nuts to 57 N.m (42 ft.lbs.).
60/40 Seat Back Domestic Sedan
60% SEAT BACK SIDE
1. With the 40% seat back removed.
2. Place 60% seat back (2) into position on the studs.
3. Fold the 60% section of the seat down.
4. Install the four nuts (1) and (3) attaching seat back (2). Tighten nuts to 57 N.m (42 ft.lbs.).
40% SEAT BACK SIDE
1. Place the 40% section (3) into position.
2. Slide 40% seat back onto the pivot pin (1) located on the 60% seat back (2).
3. Install the two nuts (5) attaching seat back. Tighten nuts to 57 N.m (42 ft.lbs.).
60/40 Seat Back Export Sedan
60% SEAT BACK SIDE
1. With the 40% seat back removed.
2. Place 60% seat back (2) into position on the studs.
3. Fold the 60% section of the seat down.
4. Install the four nuts (1) and (3) attaching seat back (2). Tighten nuts to 57 N.m (42 ft.lbs.).
40% SEAT BACK SIDE
1. Place the 40% section (3) into position onto the studs.
2. Fold the 40% section of the seat down.
3. Install the four nuts (4) attaching seat back (3). Tighten nuts to 57 N.m (42 ft.lbs.).