Harmonic Balancer - Crankshaft Pulley: Service and Repair

DAMPER-CRANKSHAFT

REMOVAL





1. Disconnect negative battery (1) cable located in trunk.
2. Remove accessory drive belts.





3. Use special tool 9365 Damper Holder (2) to hold damper (1) while removing attaching bolt (3).





4. Remove damper by using Special Tools 8194 Insert (1) and 8454 Puller (2).

INSTALLATION





1. Install damper (1) using Special Tools 8179 Screw (3), with Nut and Thrust Bearing from 6792, and 6792-1 Installer (2).





2. Install damper attaching bolt (3). Use special tool 9365 damper holder (2) to hold damper (1) while tightening attaching bolt to 170 Nm (125 ft. lbs.).
3. Install accessory drive belts.





4. Connect negative battery (1) cable located in trunk.