Center Mounted Brake Lamp: Service and Repair

CENTER HIGH MOUNTED STOP LAMP

REMOVAL




1. Disconnect and isolate the battery negative cable.
2. Remove the rear shelf trim panel.




3. Disconnect the CHMSL electrical connector (1).




4. Remove the two mounting fasteners (3) to the CHMSL (2).

INSTALLATION




1. Place the center high mounted stop lamp (2) into position at the bottom of the backlite.
2. Install and tighten the mounting fasteners (3).




3. Connect the electrical connector (1).




4. Install the rear shelf trim.
5. Connect the battery negative cable