Power Seat Switch: Testing and Inspection

SWITCH-SEAT-DRIVER
For complete circuit diagrams, refer to the appropriate wiring information. The wiring information includes wiring diagrams, proper wire and connector repair procedures, details of wire harness routing and retention, connector pin-out information and location views for the various wire harness connectors, splices and grounds.

1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat.

Power Seat Switch Test Table:

3. With assistance from another person, use an ohmmeter to test the continuity of the power seat switches in each position. See the Power Seat Switch schematic and Continuity chart. If OK, refer to testing for additional diagnostic procedures. If not OK, replace the inoperative power seat switch assembly.