Rear Suspension
STABILIZER BARREMOVAL
1. Raise and support vehicle.
2. Remove nuts and bolts from the links (3) at the stabilizer bar (6).
3. Remove stabilizer bar retainer bolts (3) and retainers (2).
4. Remove stabilizer bar (1) and replace worn, cracked or distorted bushings (4).
INSTALLATION
1. Install the stabilizer bushings (4).
2. Install the stabilizer bar (1) and center it with equal spacing on both sides. Install stabilizer bar retainers (2) and tighten bolts (3) to 54 Nm (40 ft. lbs.).
3. Install link (3) into the stabilizer bar (6). Install mounting nuts and bolts. Tighten stabilizer link nuts to 54 Nm (40 ft. lbs.).
4. Remove support and lower vehicle.