Front Door Trim Panel

PANEL-TRIM

REMOVAL




1. Remove the screws (5 & 7).

CAUTION: Trim panel is attached to the door using hooks molded into the panel. Do not pull the trim panel straight off or damage to the panel and/or power switch assembly may occur.

2. Lift the trim panel up off the lock rod (4) and attachment hooks and separate the panel from the door slightly.
3. Disconnect the electrical connectors (1).
4. Disconnect the inside handle actuator rod (3) and remove the trim panel (6).




5. Remove the switch panel (1) if necessary.

INSTALLATION




1. Install the switch assembly (1).




2. Position the trim panel (6) and connect the inside handle actuator rod (3).
3. Connect the electrical connectors (1).
4. Lift the trim panel up and onto the lock rod (4) and attachment hooks.
5. Install the screws (5 & 7).