Camshaft Position Sensor: Service and Repair

SENSOR-CAMSHAFT POSITION

REMOVAL




1. Camshaft Position Sensor location.
2. Disconnect negative battery cable.




3. Unlock electrical connector.
4. Remove electrical connector.




5. Remove mounting bolt.
6. Remove sensor.

INSTALLATION




1. Install new spacer to sensor if installing the old sensor or new sensor will have the spacer installed.




2. Install sensor and insert until sensor makes contact with tone wheel.
3. Install mounting bolt.
4. Tighten mounting bolt to 12 N.m (105 in. lbs.).




5. Install electrical connector.
6. Lock connector.
7. Connect negative battery cable.