EBC 125 RWAL

C2200-ANTI-LOCK BRAKE MODULE INTERNAL (EBC125)
.
^ When Monitored:
Ignition on.
^ Set Condition:
The Anti-lock Brake Module has detected an error after a system self test.

Possible Causes
- ANTI-LOCK BRAKE MODULE

Diagnostic Test
1. ANTI-LOCK BRAKE MODULE INTERNAL CONDITION
The Anti-lock Brake Module is reporting internal errors.

NOTE: Before continuing, check the Anti-lock Brake Module harness connector terminals for corrosion, damage, or terminal push out. Repair as necessary.

Using the schematics as a guide, inspect the wire harness and connectors. Pay particular attention to all Power and Ground circuits.
Refer to any Technical Service Bulletins that may apply.
Were there any problems found?
Yes >>Repair as necessary.
Perform ABS VERIFICATION TEST - VER 1. EBC 125 RWAL
No >>Replace the Anti-lock Brake Module.
Perform ABS VERIFICATION TEST - VER 1. EBC 125 RWAL