ALB Lever

ALB LEVER

REMOVAL
1. Raise and support the vehicle.





2. Remove the retaining clip for the ALB lever (Fig. 15).
3. Remove the bolt for the lever at the axle (Fig. 15).
4. Remove the lever.

INSTALLATION
1. Install the lever to the vehicle.
2. Install the lower mounting bolt to the axle (Fig. 15).
3. Install the lever to the shock bolt and then install the clip (Fig. 15).
4. Check the side deflection of the ALB lever with a straight edge from Point-A to Point-B as the graphic shows. Max deflection play of the actuator rod should be no more than 15 mm (0.60 inch) (Fig. 15).
5. Lower the vehicle.