Map Light Bulb: Service and Repair

Dome/Reading Lamp Bulb

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the dome/reading lamp unit from its mounting location, but do not disconnect the vehicle wire harness from the lamp connector receptacle.

Dome/Reading Lamp Bulb Remove/Install:

3. Grasp the lamp housing in one hand and carefully pull the bulb out of the bulb holder with the other hand.

INSTALLATION
1. Grasp the dome/reading lamp housing in one hand and carefully insert the bulb into the bulb holder with the other hand.

2. Reinstall the dome/reading lamp unit into its mounting location.
3. Reconnect the battery negative cable.