Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2006 >> Sprinter 2500 L5-2.7L DSL Turbo >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Accessories and Optional Equipment >> Keyless Entry Module >> Service and Repair >> Sentry Key Remote Entry Module
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Sentry Key Remote Entry Module

SENTRY KEY REMOTE ENTRY MODULE

REMOVAL
1. Open hood, disconnect and isolate the battery negative cable.
2. Wait two minutes for the system reserve capacitor to discharge before beginning any system or component service.
3. Remove top cover - cluster.

Sentry Key Remote Entry Module (SKreem) - Remove/Install:




4. Disconnect the one electrical connector to the SKREEM which is the transponder ring connector.
5. Pull SKREEM straight out of rear of instrument cluster and remove from vehicle.

INSTALLATION
1. Push SKREEM straight into the rear of instrument cluster.
2. Connect the one electrical connector to the SKREEM .
3. Install the top cover - cluster.
4. Connect the battery negative cable.
5. Verify vehicle and system operation.
6. Close hood.
pro multis · About Operation CHARM