Removal

REMOVAL
1. Remove two upper seat cushion side shields.

2. Remove seat lower cushion side shields- O/B & I/B.

3. Without flipping shield up, carefully lift shield vertically to disengage two plastic clips from the two small rods, one on cushion frame and rear one on riser assembly.

4. Using needle nose pliers, lift the spring leg upwards to disengage it from the rear small rod on riser assembly.

5. Repeat steps (1) & (2) for flipper side shield on opposite side of seat.

6. Repeat steps (1), (2), (3) for other seat.