Installation

INSTALLATION

1. Align timing belt tensioner assembly to engine and install lower mounting bolt but do not tighten (Figure 1). To properly align tensioner assembly-install one of the engine bracket mounting bolts (M10) 5 to 7 turns into the tensioner's upper mounting location (Figure 1).
2. Torque the tensioner's lower mounting bolt to 61 Nm (45 ft. lbs.). Remove the upper bolt used for tensioner alignment.
3. Install rear timing belt cover and fasteners. Torque fasteners to values specified in (Figure 3).
4. Install timing belt idler pulley and torque mounting bolt to 61 Nm (45 ft. lbs.) (Figure 4).
5. Install camshaft sprockets. Use Special Tool 6847 to hold sprockets (Figure 2), torque bolts to 101 Nm (75 ft. lbs.).
6. Install the timing belt.




Figure 1 Timing Belt Tensioner/Bracket Assembly











Figure 2 Camshaft Sprocket - Removal/Installation


1 - SPECIAL TOOL 6847






Figure 3 Rear Timing Belt Cover Fasteners











Figure 4 Timing Belt Idler Pulley