Installation

GAS ENGINES
1. Position heat shield(s) to underbody.
2. Install heat shield fasteners and tighten to 2.6 Nm (23 in. lbs.) (Figure 2), (Figure 3), or (Figure 1).
3. Lower vehicle.
4. Start the engine and inspect for exhaust leaks. Repair exhaust leaks as necessary.
5. Check the exhaust system for contact with the body panels. Make the necessary adjustments, if needed.





Figure 1 RESONATOR PIPE HEAT SHIELD











Figure 2 CATALYTIC CONVERTER HEAT SHIELD











Figure 3 MUFFLER HEAT SHIELD