Removal - 2.4L

REMOVAL - 2.4L

The EGR valve and Electrical EGR Transducer are serviced as an assembly (Figure 1).

1. Disconnect vacuum tube from electric EGR transducer. Inspect vacuum tube for damage.

2. Remove electrical connector from solenoid.

3. Remove EGR tube bolts from EGR valve.

4. Remove EGR valve from cylinder head adaptor.

5. Clean gasket surface and discard old gasket. Check for any signs of leakage or cracked surfaces. Repair or replace as necessary.






Figure 1 EGR VALVE AND TUBE 2.4L