Installation

INSTALLATION

1. Fish gear shift cable dash panel opening into engine compartment and secure grommet (Figure 1).




Figure 1 Gearshift Cable/Grommet at Dash Panel






2. Install gear shift cable through column bracket (Figure 2) until audible "click" is heard.
3. Connect gear shift cable to gear shift lever (Figure 2).




Figure 2 Gearshift Cable at Column


1 - GEAR SHIFT CABLE

4. Install knee bolster (Figure 3).




Figure 3 Knee Bolster


1 - KNEE BOLSTER

5. Install instrument panel lower silencer (Figure 4).




Figure 4 Instrument Panel Lower Silencer


1 - INSTRUMENT PANEL LOWER SILENCER

6. Install gear shift cable to transaxle upper mount bracket (Figure 5). An audible "click" should be heard.
7. Connect gear shift cable end to transaxle manual valve lever (Figure 5).




Figure 5 Gearshift Cable at Transaxle






8. Adjust gearshift cable.
9. Install speed control servo into position.
10. Install battery.
11. Install battery shield.
12. Connect battery cables.