Removal

REMOVAL

1. Remove the wiper arms.

2. Disconnect the washer hose at the in-line connector located near the air cleaner housing.

3. Lift the cowl grille and disconnect the washer hose grommet from the hole in the wiper module. Pull the washer hose and the grommet completely through the wiper module tub hole.

4. Remove the cowl grille.

CAUTION: Be careful not to scratch the cowl grille on the corner of the hood.

5. Disconnect the wiper linkage end at the inner pivot.

6. Disconnect the wiper linkage from the outer pivot.