Driver Horizontal Sensor Out of Range High

Test 1-2:

Test 3-7:

Test 8-9:

SYMPTOM
DRIVER HORIZONTAL SENSOR OUT OF RANGE HIGH

WHEN MONITORED
Continuously when the PCI bus is active.

SET CONDITION
This condition is immediately set when the seat motor potentiometer feeds a value higher than the Memory Seat/Mirror/Adjustable Pedals Module has stored in EEPROM. Code will remain for 50 ignition cycles.

POSSIBLE CAUSES
- Memory seat/mirror/adjustable pedals module sensor ground open
- Seat sensor ground wire open
- 5 volt supply shorted high
- Check voltage on horizontal position signal circuit
- Horizontal sensor high
- Check horizontal sensor short to motor
- Seat 5 volt supply wire shorted to horizontal position signal circuit
- Memory seat/mirror/adjustable pedals module horizontal sensor high
- Stored diagnostic trouble code