Removal

REMOVAL
1. Disconnect and isolate the battery negative cable.

2. Remove glove box from instrument panel.

3. Disconnect antenna cable connector from extension cable.






Figure 1 Antenna Cable
4. Remove right kick trim panel.

5. Disengage rubber grommet insulator from door hinge pillar.

6. Pull antenna cable through hinge pillar into opening between door hinges.

7. Hoist and support vehicle on safety stands.

8. Remove front wheel.

9. Remove front wheelhouse splash shield.






Figure 2
10. Remove antenna mast from antenna base.






Figure 3
11. Using cap nut tool, remove cap nut holding antenna base to front fender.

12. Remove antenna base from under front fender.