Removal

REMOVAL

NOTE: The driver's side a double ended stud is used. A nut has to be removed for the seat belt anchor removal and the stud for the retractor removal.


NOTE: On the passenger side there is a belt tension sensor.

1. Slide lower seat belt cover rearward to expose anchor fastener.

2. Remove bolt/nut attaching lower seat belt anchor to floor.

3. Remove upper B-pillar trim cover.

4. Remove access panel from B-pillar trim (Figure 1).

5. Disengage hidden clips attaching lower trim cover to B-pillar.

6. Remove lower B-pillar trim cover from vehicle.






Figure 1 LOWER B-PILLAR TRIM COVER