Removal

REMOVAL

NOTE: Bench seats equipped with child restraint seats have an interlock feature that will not allow the seat back to fold forward with the child seat open.

1. Remove the headrests.

2. Remove the armrests, if equipped.

3. Remove the upper hinge cover.

4. Disengage synchronizing cable housing from seat back hinge, if equipped.

5. Disengage synchronizing cable end from (clip on left side) hinge latch release arm, if equipped.

6. Remove shoulder bolts attaching seat back hinge to seat back frame (Figure 1).

7. Remove the seat back.






Figure 1 SEAT BACK HINGE - TYPICAL