Installation

INSTALLATION

The power seat track and motors are serviced as an assembly.

1. Install wire harness.

2. Place seat back in position.

3. Insert stud on seat back frame into recliner.

4. Install pivot bolts to hold seat back frame to seat track. Tighten bolts to 48 Nm (35 ft. lbs.)

5. Install nut attaching recliner to seat back frame. Tighten bolts to 12 Nm (105 in-lbs)

6. Install seat cushion.

7. Install seat in vehicle. Tighten fasteners to 60 Nm (44 ft. lbs.) torque.