Installation

INSTALLATION

1. Position the seat cushion on the seat track.

2. Install the four seat track retaining bolts in the seat cushion pan. Torque the bolts to 28.5 Nm (21 ft-lbs.).

3. Position the seat back and install the two seat back frame mounting bolts and the two seat back recliner bolts. Torque the bolts to 55 Nm (40.5 ft-lbs.).

4. Route and connect the electrical connectors between the power seat track and the seat assembly.

5. Install the seat side cover and power seat switch as an assembly.

6. Install the front seat track rear cover.

7. Position the Memory Seat/Mirror Module (MSMM) and connect the MSMM electrical connectors (if equipped).

8. Install the MSMM mounting fasteners (if equipped).

9. Install the seat assembly in the vehicle.

10. Connect the battery negative cable.