Description

MANUAL THREE ZONE

The fully adjustable manual three zone front and rear heating and A/C system allows intermediate seat passengers the ability to regulate air temperature as well as fan speed and provides floor outlets to the rear of the right sliding door and overhead outlets at each rear outboard seating position. Primary control for the rear blower is on the front A/C-heater control. All controls are identified by ISO graphic symbols.


FRONT CONTROL PANEL


The front A/C-heater control and integral computer mounted in the instrument panel contains:

- a rear window defogger on/off switch.
- slide controls for completely independent side-to-side temperature control of the discharge air. The full range of temperature that the system can produce in any mode is available on either side of the vehicle by independently positioning the slide controls on the instrument panel.
- an air recirculation button. The Recirculate button contains an LED that illuminates to show when the function is in operation.
- an air conditioning button that allows the compressor to be turned on/off. The Snowflake button contains an LED that illuminates to shown when the function is in operation.
- a rotary knob for front fan speed selection and turning the heater-A/C system off.
- a rotary knob for rear fan speed selection.
- a rotary knob for mode control.



REAR CONTROL PANEL


The rear A/C-heater control centrally mounted in the headliner allows intermediate seat passengers to adjust rear air distribution, temperature and blower motor speed when the center knob on the front A/C-heater control is set to the Rear position. The rear A/C-heater control contains:

- a rotary adjustment knob for temperature.
- a rotary adjustment for fan speed control.