Installation

3.3L/3.8L

1. Install supply hose onto supply fitting on power steering pump (Figure 1). Slide the hose clamp into position on fluid reservoir and attach it. Be sure hose clamp in installed past bead on fluid reservoir fitting.
2. Install supply hose onto reservoir (Figure 1). Slide the hose clamp into position on fluid reservoir and attach it. Be sure hose clamp in installed past bead on fluid reservoir fitting.
3. Fill and bleed power steering system.
4. Inspect system for leaks.





Figure 1 RESERVOIR AND HOSES - 3.3L/3.8L