Removal - 3.3/3.8L

REMOVAL - 3.3/3.8L
1. Perform fuel system pressure release procedure before servicing or starting repairs.

2. Disconnect negative cable from battery.

3. Remove upper intake manifold, refer to the Engine/Manifolds/Upper Intake.

4. Cover intake manifold with suitable cover when servicing.

5. Remove the fuel hose quick connect fitting from the chassis tube.


WARNING: WRAP A SHOP TOWEL AROUND HOSES TO CATCH ANY GASOLINE SPILLAGE.

6. Remove the fuel rail attaching bolts (Figure 1).






Figure 1 FUEL INJECTORS 3.3/3.8L
7. Remove fuel rail. Be careful not to damage the injector O-rings upon removal from their ports.